5 thoughts on “Dyeing position of printing and dyeing factory”
Clifton
Well, first of all, there are cloth, 1, the purpose is to remove some impurities such as oil stains on the cloth surface, prepare for dyeing so that the dye can better dye fibers. 2, dyeing, put cloth, dye, and additive in the dye tank. Specific temperature and specific thermal insulation time (the types of cloth are different, dyes, additives, and temperature are different), dye dye fibers to achieve the purpose of dyeing. 3, post -treatment, washing water, remove the floating color of the upper surface, fix the color, and add a soft agent. 4, setting. 5, test cloth, packaging, shipment. The dyeing cloth is the hardest position in the dyeing factories, and it is also the post with the most chemical raw materials. If generally dyeing factories do not do well in the protection of chemical items, it will hurt the body. If you are not married and have children yet, it is recommended that you have a job and find a suitable job.
Our factory does not do it in printing and dyeing, really tired, but the salary is good, and people who need to suffer. The following is a list of general cloth conventional varieties. ), Four -corner mesh 1 # Black cloth on the reverse hot rolling → enter the cylinder dyeing → out of the cylinder dehydration → open the amplitude → fixed; prevent fine wrinkles, tattoo the tank in the opposite side of the litter, and eat the soft VES 8 g/L above 300 g/㎡, among which Don't be cut off. Color cloth 2 # The front of the blank cloth is hot rolled → enter the cylinder dyeing → out of the cylinder dehydration → open the amplitude → fixed; prevent fine wrinkles, the tattoos are cleared in the back side of the tank, and more than 300 g/㎡. Do not be cut off. Bleeding/Benbai This cotton 200g/㎡ sweat cloth ﹙includes double yarn), hexagonal mesh 3 # → inlet dyeing → out of the cylinder dehydration → opening → fixed; Eat a soft VES 8 g/L above G/㎡, where the cylindrical is not cut off. The cotton hair rings, sweater cloth, velvet 4 # → enter the cylinder dyeing → out of the cylinder dehydration → fixed; , Rotal Rotal Role inlet Tank, Eat VES 8 G/L above 300 g/㎡. This whole cotton amino spandex sweat cloth, amposor mesh eyes, spandex coil circles 5 # Black cloth retreat → reservation → negative sewing edge → enter the cylinder dye To prevent spandex from broken, the opposite fabric of the rose is entered into the cylinder, and the VES 8 g/L is more than 300 G/㎡. The cotton 1 × 1 lit tattoo, cotton hair cloth, Walv grid 6 # → enter the cylinder dye → out of the cylinder dehydration → set; pay attention , Drying and setting the anti -needle hole. The cotton 1 × 1, 2 × 2 lit tattoos, spandex tattoo ﹙cylinders﹚ 7 # → enter the cylinder dyeing → out of the cylinder dehydration → dry; You can get out of the tank if you feel qualified.
t/c, c/t, CVC pills, wool rings, sweater, Walfg 8 # → enter the cylinder dyeing → out of the cylinder dehydration → ﹙drying, pulling hair, pulling hair﹚ → Format; Control the cooling speed, prevent creases, the opposite fabric of the rib tip into the cylinder, and more than 300 g/㎡, eat VES 8 g/L. 240 g/㎡ above 9 # 2 2 → enter the cylinder dyeing → out of the cylinder dehydration → ﹙drying, pulling hair → setting; control the cooling speed, prevent creases, signs, and cut hair. In charge, the opposite side of the rosa is inlet, and more than 300 g/㎡ or more eats VES 8 G/L. 240 g/㎡ below 10 # Black cloth reverse fabric cloth → enter the cylinder dyeing → open amplitude → 190 ° C fixed → negative sewing edge → restore cleaning → set of cotton Pull Mao 品 → finished product 130 ° C; pay attention to the accuracy, the opposite fabric of the rose into the cylinder, more than 300 g/㎡, eat VES 8 G/L. Special deep -color level has whiteness requirements 11 # Black cloth booking → dyeing without sewing → out of the cylinder dehydration → rational cloth → ﹙drying, pulling hair → setting; controlling cooling speed, preventing creases, 300 g/ 300 g/ Eat VES 8 G/L more than iconic tattoo. Above 240 G/㎡, the texture is tight 12 # The frontal cloth of the gray cloth → input the cylinder dyeing → out of the cylinder dehydration → the section of the cotton without sewing → out of the cylinder → Format; Prevent creases, the opposite of the tattoo in the opposite side of the tank, and more than 300 g/㎡. Eat VES 8 G/L. On the front, there are low bombs T/C, C/T, CVC ammonia velvet cloth, wool ring, sweater cloth 13 # blank cloth retreat → reservation → not sewing edge dye → Format; Pay attention to the strong fabric to prevent spandex from broken, the opposite fabric of the rose into the cylinder, and more than 300 g/㎡.
t/C, C/T, T/R Khan cloth 14 # → enter the cylinder dyeing → dehydrated → fixed; control the cooling rate, prevent creases, rib tattoos reverse inlets into the back cloth. Eat VES 8 G/L above 300 g/㎡. 15 # → enter the cylinder dyeing → dehydration of the cylinder → open amplitude → 190 ° C fixed → reverse sewing edge → reducing cleaning → setting cylinder dehydration → scoring → 130 ° C setting; Robe tattoos; tattoo tattoos; Invilt the cylinder, and eat VES 8 G/L above 300 g/㎡. Special deep -color level has whiteness requirements T/C mesh cloth 16 # blank cloth section → blank 140 ° C/13m drying → reverse seam edge → dyeing → out of the cylinder dehydration → tearing edge → drying → control, control, control, control, control, control, control, control, control, control The cooling speed is to prevent creases. t/C, C/T, T/R aminotramid mesh eyes, sweat cloth 17 # → reservation → negative sewing edge → dyeing → scoring cloth tear edge → fixed; control the dyeing temperature and cooling rate, Prevent creases and spandex breaks, the opposite fabrics of the tattoo are entered into the cylinder, and more than 300 g/㎡ or more eat VES 8 g/L. t/c, C/T amproxal 18 # Black fabric booking → dyeing without sewing → out of the cylinder dehydration → drying → drying → setting; control over the cooling speed, prevent creases, scratches, Robin tattoos enter the opposite side of the tattoo. The cylinder. cvc velvet 19 # → enter the cylinder dyeing → out of the cylinder dehydration → ring drying → shaped → ﹙Pay attention to the hair direction; Attention, pay attention to the direction of the flowing water flow to prevent random hair and ditch.
This full -polyester cotton wool cloth, double -sided cloth, mesh cloth 20 # blank cloth turning over → inlet oil → dyeing → dehydration → dried → setting; control the cooling speed, control the temperature, control, control the temperature, Prevent chicken feet printing and ditch. Middle and light -colored 21 # Black cloth section → scheduled 195 ° C/13m → repeated sample → not sewing edge staining → reducing cleaning → dehydration → drying → finished product 130 ° C, control the cooling rate during dyeing, the cooling rate, Prevent chicken feet printing and ditch. Double -sided cloth above 220g/㎡ 22 # 2 2 → removing oil dyeing → reducing and cleaning → 190 ° C fixed → reducing cleaning → dehydration → dry cloth → finished product 130 ° C, control the cooling rate in the cylinder, control the cooling rate in the cylinder , Prevent chicken feet printing and ditch. Dark The whole -polyethylene ammonia sweat cloth 23 # Black cloth reservation → reverse sewing edge → removing oil dyeing → dehydration → torn edge → fixing; strictly follow the process, be careful of color flowers, avoid repairs, and prevent spandex cuts. The adhesive, silk, C/M, C/R, milk, soybean, soybean and its blended sweat 24 # → enter the cylinder dyeing → dehydrated → drying → fixed; During the sewing head, the holes and rotten edges should be repaired. The direction is consistent to prevent the cloth of the dyeing process from breaking the cloth, the dish of the cloth to produce color flowers. After the cylinder is out of the cylinder, it is dehydrated and dried in time to prevent quality problems. The adhesive, silk, C/M, C/R, milk, soybean, soybean and its blended amino cloth 2 25 # → sewing head → reservation → negative sewing edge → dyeing Dry → fixed; find rotten edges and holes out during predetermined. During the seam, the hole is broken, and the rotten edges should be sewed to prevent the dyeing process from breaking the cloth, losing cloth to produce color flowers, and dehydrating and drying in time after the cylinder is out of the cylinder to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality. There was a problem. This cotton, cotton, and polyester sweat cloth 26 # Black cloth retreat → reservation → negative sewing side → dyeing → dehydration → drying → drying → fixed; control the cooling rate, prevent fine wrinkles, the opposite fabric of the rib tip into the opposite fabric inlet Eat VES 8 G/L above 300 g/㎡.
The double -sided cloth of cotton, cotton cover, bird's eye cloth, mezzanine cloth 27 # ﹙﹙﹙﹚﹚﹚ 外 → → enter the cylinder dye → dehydrated → section → dry → Format; control the cooling rate to prevent creases and ditch. Middle Light color 28 # 中 ﹙﹙﹙﹙﹚﹚﹚ → → → enter the cylinder dyeing → dehydration → section → 190 ° C medium → not sewn the edge of the cylinder to restore and clean → Ri cloth → drying → 130 ° C fixed, control the cooling rate in the cylinder to prevent creases and grooves. Dark
Thisy ash drops ﹙﹙﹚﹚﹚ 29 # 深 深 → → enter the cylinder and fall into water (001 process) → dehydration → open amplitude → fixed; Essence Khan cloth/whole cotton velvet 30 # → section → enter the cylinder and fall into water (001 process) → dehydration → rational cloth → fixed; T/C, CVC velvet cloth Thisy ash drops ﹙﹙﹚ 31 # t t → reservation → not sewn the edge of the cylinder and fall into water → dehydrate → fixed; Essence The colored strip drop water ﹙does not contain spandex﹚ 32 # → open amplitude → shake grains → rayon seam head → eaten soft fixed type "9999" Putting of the grain clipper → sewing head → over water and eating soft -type "AAAA"
According to the original poster, it is recommended that the landlord not to engage in this job, because I used to do it in the printing and dyeing factory before, and the chemical composition is relatively large. Since you have hepatitis B, of course, the environment has played a key role in your physical health, because the printing and dyeing plant still has the printing and dyeing factory still has still has the printing plant and dyeing factory. One characteristic is that the temperature is also relatively high. If the landlord works at high temperature and chemical composition, the body will slowly drag down, and then I am afraid that the condition will be aggravated. If the landlord is special, I can help analyze it. What work is good!
Hello, I did it in the printing and dyeing factory when I was in an internship. First of all, this work needs to be shifted, because the machine needs to continue to run. If it is stopped and restarted, it will consume a lot of energy, and it is not good for the machine. Secondly, printing and dyeing must be bad for the body, and there are many chemicals. Third, very sinking and tired. In short, it is not suitable for long -term drying. If it is rotating, it is okay to do it for a while. It is recommended to change the job for a long time.
The working environment of the printing and dyeing factory is relatively bad. After all, it is related to chemical industry. Although I have not yet worked, I have already learned about the internship. If you are afraid of tired, don't do this, the foundation of this line is relatively tired, usually 12 hours! And there seems to be a change in class ~~
Well, first of all, there are cloth,
1, the purpose is to remove some impurities such as oil stains on the cloth surface, prepare for dyeing so that the dye can better dye fibers.
2, dyeing, put cloth, dye, and additive in the dye tank. Specific temperature and specific thermal insulation time (the types of cloth are different, dyes, additives, and temperature are different), dye dye fibers to achieve the purpose of dyeing.
3, post -treatment, washing water, remove the floating color of the upper surface, fix the color, and add a soft agent.
4, setting.
5, test cloth, packaging, shipment.
The dyeing cloth is the hardest position in the dyeing factories, and it is also the post with the most chemical raw materials. If generally dyeing factories do not do well in the protection of chemical items, it will hurt the body. If you are not married and have children yet, it is recommended that you have a job and find a suitable job.
Our factory does not do it in printing and dyeing, really tired, but the salary is good, and people who need to suffer. The following is a list of general cloth conventional varieties. ), Four -corner mesh 1 # Black cloth on the reverse hot rolling → enter the cylinder dyeing → out of the cylinder dehydration → open the amplitude → fixed; prevent fine wrinkles, tattoo the tank in the opposite side of the litter, and eat the soft VES 8 g/L above 300 g/㎡, among which Don't be cut off. Color cloth
2 # The front of the blank cloth is hot rolled → enter the cylinder dyeing → out of the cylinder dehydration → open the amplitude → fixed; prevent fine wrinkles, the tattoos are cleared in the back side of the tank, and more than 300 g/㎡. Do not be cut off. Bleeding/Benbai
This cotton 200g/㎡ sweat cloth ﹙includes double yarn), hexagonal mesh 3 # → inlet dyeing → out of the cylinder dehydration → opening → fixed; Eat a soft VES 8 g/L above G/㎡, where the cylindrical is not cut off.
The cotton hair rings,
sweater cloth, velvet 4 # → enter the cylinder dyeing → out of the cylinder dehydration → fixed; , Rotal Rotal Role inlet Tank, Eat VES 8 G/L above 300 g/㎡.
This whole cotton amino spandex sweat cloth,
amposor mesh eyes, spandex coil circles 5 # Black cloth retreat → reservation → negative sewing edge → enter the cylinder dye To prevent spandex from broken, the opposite fabric of the rose is entered into the cylinder, and the VES 8 g/L is more than 300 G/㎡.
The cotton 1 × 1 lit tattoo,
cotton hair cloth, Walv grid 6 # → enter the cylinder dye → out of the cylinder dehydration → set; pay attention , Drying and setting the anti -needle hole.
The cotton 1 × 1, 2 × 2 lit tattoos, spandex tattoo ﹙cylinders﹚ 7 # → enter the cylinder dyeing → out of the cylinder dehydration → dry; You can get out of the tank if you feel qualified.
t/c, c/t, CVC pills, wool rings, sweater, Walfg 8 # → enter the cylinder dyeing → out of the cylinder dehydration → ﹙drying, pulling hair, pulling hair﹚ → Format; Control the cooling speed, prevent creases, the opposite fabric of the rib tip into the cylinder, and more than 300 g/㎡, eat VES 8 g/L. 240 g/㎡ above
9 # 2 2 → enter the cylinder dyeing → out of the cylinder dehydration → ﹙drying, pulling hair → setting; control the cooling speed, prevent creases, signs, and cut hair. In charge, the opposite side of the rosa is inlet, and more than 300 g/㎡ or more eats VES 8 G/L. 240 g/㎡ below
10 # Black cloth reverse fabric cloth → enter the cylinder dyeing → open amplitude → 190 ° C fixed → negative sewing edge → restore cleaning → set of cotton Pull Mao 品 → finished product 130 ° C; pay attention to the accuracy, the opposite fabric of the rose into the cylinder, more than 300 g/㎡, eat VES 8 G/L. Special deep -color level has whiteness requirements
11 # Black cloth booking → dyeing without sewing → out of the cylinder dehydration → rational cloth → ﹙drying, pulling hair → setting; controlling cooling speed, preventing creases, 300 g/ 300 g/ Eat VES 8 G/L more than iconic tattoo. Above 240 G/㎡, the texture is tight
12 # The frontal cloth of the gray cloth → input the cylinder dyeing → out of the cylinder dehydration → the section of the cotton without sewing → out of the cylinder → Format; Prevent creases, the opposite of the tattoo in the opposite side of the tank, and more than 300 g/㎡. Eat VES 8 G/L. On the front, there are low bombs
T/C, C/T, CVC ammonia velvet cloth, wool ring, sweater cloth 13 # blank cloth retreat → reservation → not sewing edge dye → Format; Pay attention to the strong fabric to prevent spandex from broken, the opposite fabric of the rose into the cylinder, and more than 300 g/㎡.
t/C, C/T, T/R Khan cloth 14 # → enter the cylinder dyeing → dehydrated → fixed; control the cooling rate, prevent creases, rib tattoos reverse inlets into the back cloth. Eat VES 8 G/L above 300 g/㎡.
15 # → enter the cylinder dyeing → dehydration of the cylinder → open amplitude → 190 ° C fixed → reverse sewing edge → reducing cleaning → setting cylinder dehydration → scoring → 130 ° C setting; Robe tattoos; tattoo tattoos; Invilt the cylinder, and eat VES 8 G/L above 300 g/㎡. Special deep -color level has whiteness requirements
T/C mesh cloth 16 # blank cloth section → blank 140 ° C/13m drying → reverse seam edge → dyeing → out of the cylinder dehydration → tearing edge → drying → control, control, control, control, control, control, control, control, control, control The cooling speed is to prevent creases.
t/C, C/T, T/R aminotramid mesh eyes, sweat cloth 17 # → reservation → negative sewing edge → dyeing → scoring cloth tear edge → fixed; control the dyeing temperature and cooling rate, Prevent creases and spandex breaks, the opposite fabrics of the tattoo are entered into the cylinder, and more than 300 g/㎡ or more eat VES 8 g/L.
t/c, C/T amproxal 18 # Black fabric booking → dyeing without sewing → out of the cylinder dehydration → drying → drying → setting; control over the cooling speed, prevent creases, scratches, Robin tattoos enter the opposite side of the tattoo. The cylinder.
cvc velvet 19 # → enter the cylinder dyeing → out of the cylinder dehydration → ring drying → shaped → ﹙Pay attention to the hair direction; Attention, pay attention to the direction of the flowing water flow to prevent random hair and ditch.
This full -polyester cotton wool cloth,
double -sided cloth, mesh cloth 20 # blank cloth turning over → inlet oil → dyeing → dehydration → dried → setting; control the cooling speed, control the temperature, control, control the temperature, Prevent chicken feet printing and ditch. Middle and light -colored
21 # Black cloth section → scheduled 195 ° C/13m → repeated sample → not sewing edge staining → reducing cleaning → dehydration → drying → finished product 130 ° C, control the cooling rate during dyeing, the cooling rate, Prevent chicken feet printing and ditch. Double -sided cloth above 220g/㎡
22 # 2 2 → removing oil dyeing → reducing and cleaning → 190 ° C fixed → reducing cleaning → dehydration → dry cloth → finished product 130 ° C, control the cooling rate in the cylinder, control the cooling rate in the cylinder , Prevent chicken feet printing and ditch. Dark
The whole -polyethylene ammonia sweat cloth 23 # Black cloth reservation → reverse sewing edge → removing oil dyeing → dehydration → torn edge → fixing; strictly follow the process, be careful of color flowers, avoid repairs, and prevent spandex cuts.
The adhesive, silk, C/M, C/R, milk, soybean, soybean and its blended sweat 24 # → enter the cylinder dyeing → dehydrated → drying → fixed; During the sewing head, the holes and rotten edges should be repaired. The direction is consistent to prevent the cloth of the dyeing process from breaking the cloth, the dish of the cloth to produce color flowers. After the cylinder is out of the cylinder, it is dehydrated and dried in time to prevent quality problems.
The adhesive, silk, C/M, C/R, milk, soybean, soybean and its blended amino cloth 2 25 # → sewing head → reservation → negative sewing edge → dyeing Dry → fixed; find rotten edges and holes out during predetermined. During the seam, the hole is broken, and the rotten edges should be sewed to prevent the dyeing process from breaking the cloth, losing cloth to produce color flowers, and dehydrating and drying in time after the cylinder is out of the cylinder to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality from quality to prevent quality. There was a problem.
This cotton, cotton, and polyester sweat cloth 26 # Black cloth retreat → reservation → negative sewing side → dyeing → dehydration → drying → drying → fixed; control the cooling rate, prevent fine wrinkles, the opposite fabric of the rib tip into the opposite fabric inlet Eat VES 8 G/L above 300 g/㎡.
The double -sided cloth of cotton, cotton cover, bird's eye cloth, mezzanine cloth 27 # ﹙﹙﹙﹚﹚﹚ 外 → → enter the cylinder dye → dehydrated → section → dry → Format; control the cooling rate to prevent creases and ditch. Middle Light color
28 # 中 ﹙﹙﹙﹙﹚﹚﹚ → → → enter the cylinder dyeing → dehydration → section → 190 ° C medium → not sewn the edge of the cylinder to restore and clean → Ri cloth → drying → 130 ° C fixed, control the cooling rate in the cylinder to prevent creases and grooves. Dark
Thisy ash drops ﹙﹙﹚﹚﹚ 29 # 深 深 → → enter the cylinder and fall into water (001 process) → dehydration → open amplitude → fixed; Essence Khan cloth/whole cotton velvet
30 # → section → enter the cylinder and fall into water (001 process) → dehydration → rational cloth → fixed; T/C, CVC velvet cloth
Thisy ash drops ﹙﹙﹚ 31 # t t → reservation → not sewn the edge of the cylinder and fall into water → dehydrate → fixed; Essence
The colored strip drop water ﹙does not contain spandex﹚ 32 # → open amplitude → shake grains → rayon seam head → eaten soft fixed type "9999"
Putting of the grain clipper → sewing head → over water and eating soft -type "AAAA"
According to the original poster, it is recommended that the landlord not to engage in this job, because I used to do it in the printing and dyeing factory before, and the chemical composition is relatively large. Since you have hepatitis B, of course, the environment has played a key role in your physical health, because the printing and dyeing plant still has the printing and dyeing factory still has still has the printing plant and dyeing factory. One characteristic is that the temperature is also relatively high. If the landlord works at high temperature and chemical composition, the body will slowly drag down, and then I am afraid that the condition will be aggravated. If the landlord is special, I can help analyze it. What work is good!
Hello, I did it in the printing and dyeing factory when I was in an internship. First of all, this work needs to be shifted, because the machine needs to continue to run. If it is stopped and restarted, it will consume a lot of energy, and it is not good for the machine. Secondly, printing and dyeing must be bad for the body, and there are many chemicals. Third, very sinking and tired. In short, it is not suitable for long -term drying. If it is rotating, it is okay to do it for a while. It is recommended to change the job for a long time.
The working environment of the printing and dyeing factory is relatively bad. After all, it is related to chemical industry. Although I have not yet worked, I have already learned about the internship. If you are afraid of tired, don't do this, the foundation of this line is relatively tired, usually 12 hours! And there seems to be a change in class ~~